Searching For A Mobile Phone - Mercedes-Benz S-Class Coupe Operator's Manual

Operating system
250
Connecting a mobile phone
Requirements
For telephony via the Bluetooth
require a Bluetooth
mobile phone must support Hands-Free Profile
1.0 or above. You can also connect your mobile
phone via NFC (Near Field Communication) with
the multimedia system. For more information
(see the Digital Operator's Manual).
Multimedia system:
Select VehicleQSystem Set‐
X
tingsQActivate
Activate Bluetooth
X
Mobile phone:
Activate Bluetooth
X
®
tooth visibility for other devices (see the
manufacturer's operating instructions).
®
The Bluetooth device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
ing information will be transmitted after you
connect:
Phone book
R
Call lists
R
Messages
R
i
Further information on suitable mobile
phones can be found at: http://
www.mercedes-benz.com/connect
i
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes (1-800-367-6372).
In Canada, you can get in touch with the Cus-
tomer Relations Center on 1-800-387-0100.
Searching for and authorizing a mobile
phone
Before using your mobile phone without NFC
with the multimedia system, you will need to
search for the phone and then authorize it.
Depending on the mobile phone, authorization
either takes place by means of Secure Simple
®
interface, you
®
-capable mobile phone. The
Bluetooth.
®
O.
®
and, if necessary, Blue-
®
profiles, the follow-
Pairing or by entering a passkey. The multimedia
system automatically makes the procedure that
is relevant for your mobile phone available. The
mobile phone is always connected automati-
cally after authorization. Further information on
using a mobile phone with the multimedia sys-
tem (see the Digital Operator's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.

Searching for a mobile phone

Multimedia system:
Select PhoneQConnect
X
Select Search for
X
Select Start Search.
X
The available mobile phones are displayed in
the device list.
Symbols in the device list
Sym- Explanation
bol
Ï New mobile phone found, not yet
authorized.
Ñ Mobile phone is authorized, but is
not connected
# Mobile phone is authorized and
connected
Connecting a mobile phone
Authorization using Secure Simple Pairing:
Select mobile phone.
X
A code is displayed in the multimedia system
and on the mobile phone.
If codes match: select
X
system.
Confirm code on the mobile phone. Depend-
X
ing on the mobile phone used, confirm the
connection to the multimedia system and for
the PBAP and MAP Bluetooth
prompt to confirm may take up to two
minutes to be displayed (see the manufactur-
er's operating instructions).
If the codes are different: select
X
multimedia system.
The process is canceled.
Repeat authorization.
Device.
Phones.
Yes on the multimedia
®
profiles. The
No on the