Display Message - Mercedes-Benz S-Class Coupe Operator's Manual

Hide thumbs Also See for S-Class Coupe:
Table of Contents

Advertisement

Display messages
Lights
Display messages
b
Check Left Low Beam
(Example)
b
Malfunction See
Operator's Manual
b
Auto Lamp Function
Inoperative
b
Switch Off Lights
b
Switch On Headlamps
Adaptive Highbeam
Assist Plus Inoper‐
ative
Adaptive Highbeam
Assist Plus Cur‐
rently Unavailable
See Operator's Man‐
ual
Possible causes/consequences and M Solutions
If the conditions are not fulfilled, the system is not operating correctly.
Visit a qualified specialist workshop immediately.
X
For further information about the Occupant Classification System, see
(
page 49).
Y
Possible causes/consequences and M Solutions
The bulb in question is malfunctioning.
Visit a qualified specialist workshop.
X
or
Check whether you are permitted to replace the bulb yourself
X
(
page 108).
Y
i
LED light sources: the display message for the corresponding
lamp only appears when all the LEDs in the lamp have failed.
The exterior lighting is malfunctioning.
Visit a qualified specialist workshop.
X
The light sensor is malfunctioning.
Visit a qualified specialist workshop.
X
You leave the vehicle and the lights are switched on. A warning tone
also sounds.
Turn the light switch to position Ã.
X
You are driving with low-beam headlamps switched off.
Turn the light switch to position L or Ã.
X
Adaptive Highbeam Assist Plus is faulty.
Visit a qualified specialist workshop.
X
Adaptive Highbeam Assist Plus is deactivated and temporarily inop-
erative.
Possible causes are:
the windshield in the camera's field of vision is dirty
R
visibility is impaired due to heavy rain, snow or fog
R
Clean the windshield.
X
If the system detects that the camera is fully operational again, the
Adaptive Highbeam Assist Plus Available Again
displayed.
Adaptive Highbeam Assist Plus is available again.
Display messages
message is
215
Z

Advertisement

Table of Contents
loading

Table of Contents