Key Positions Smartkey - Mercedes-Benz S-Class Coupe Operator's Manual

There is a risk of fire and an accident. Release
the parking brake fully before driving off.
!
Do not warm up the engine with the vehicle
stationary. Drive off immediately. Avoid high
engine speeds and driving at full throttle until
the engine has reached its operating temper-
ature.
Only shift the automatic transmission to the
desired drive position when the vehicle is sta-
tionary.
Where possible, avoid spinning the drive
wheels when pulling away on slippery roads.
You could otherwise damage the drive train.
!
At low engine oil temperatures under 68 ‡
(+20 †), the maximum engine speed is limi-
ted in order to protect the engine. To protect
the engine and maintain smooth engine oper-
ation, avoid driving at full throttle when the
engine is cold.
Key positions
SmartKey
To remove the SmartKey
g
Power supply for some consumers, such as
1
the windshield wipers
Ignition (power supply for all consumers)
2
and drive position
3 To start the engine
The SmartKey can be turned in the ignition lock
even if it is not the correct SmartKey for the
vehicle. The ignition is not switched on. The
engine cannot be started.
Start/Stop button
General notes
All vehicles are equipped with a removable
Start/Stop button.
The Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in the
vehicle.
When you insert the Start/Stop button into the
ignition lock, the system needs approximately
two seconds recognition time. You can then use
the Start/Stop button.
Pressing the Start/Stop button several times in
succession corresponds to the different Smart-
Key positions in the ignition lock. This is only the
case if you are not depressing the brake pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
A check which periodically establishes a radio
connection between the vehicle and the Smart-
Key determines whether a valid SmartKey is in
the vehicle. This occurs, for example, when
starting the engine.
To start the vehicle without actively using the
SmartKey:
the Start/Stop button must be inserted in the
R
ignition lock.
the SmartKey must be in the vehicle.
R
the vehicle must not be locked with the
R
SmartKey or KEYLESS-GO (
Do not keep the SmartKey:
with electronic devices, e.g. a mobile phone
R
or another SmartKey.
with metallic objects, e.g. coins or metal foil.
R
inside metallic objects, e.g. a metal case.
R
This can affect the functionality of the Smart-
Key.
If you lock the vehicle with the SmartKey's
remote control or with KEYLESS-GO, after a
short time:
you will not be able to switch on the ignition
R
with the Start/Stop button.
you will not be able to start the engine with the
R
Start/Stop button until the vehicle is
unlocked again.
If you lock the vehicle centrally using the button
on the front door ( page 78), you can continue
Y
to start the engine with the Start/Stop button.
Driving
121
page 73).
Y
Z