Active Blind Spot Assist - Mercedes-Benz S-Class Coupe Operator's Manual

Driving systems
180
Display in the assistance graphic
Problems with Night View Assist Plus
Problem
The picture quality of
Night View Assist Plus
has deteriorated.
The pedestrian and ani-
mal recognition is not
available.
Driving Assistance PLUS package
General notes
The Driving Assistance PLUS package consists
of DISTRONIC PLUS (
Spot Assist ( page 180) and Active Lane Keep-
Y
ing Assist ( page 183).
Y
Possible causes/consequences and M Solutions
The windshield is fogged up on the inside.
Fold down camera cover (
X
Defrost the windshield (
X
The windshield is iced up.
De-ice the windshield (
X
The windshield wipers are smearing the windshield.
Replace the wiper blades (
X
The windshield is smeared after the vehicle has been cleaned in a car
wash.
Clean the windshield (
X
There is windshield chip damage in the camera's field of vision.
Replace the windshield.
X
the infrared camera in the radiator trim is dirty
Use a soft cloth and water to clean the infrared camera.
X
page 147), Active Blind
Y
To display the assistance graphic:select
X
the Assistance Graphic
board computer ( page 197).
Y
Pedestrian symbol : in the assistance
graphic indicates the status of the spotlight
function. If the symbol is displayed not filled
in, the function is switched on. If the symbol is
displayed filled in, the conditions for the spot-
light function are met.
page 285).
Y
page 115).
Y
page 115).
Y
page 109).
Y
page 283).
Y

Active Blind Spot Assist

General notes
Active Blind Spot Assist uses a radar sensor
system, pointed toward the rear of the vehicle,
to monitor the area to the sides of the vehicle
which the driver is unable to see. A warning dis-
play in the exterior mirrors draws your attention
to vehicles detected in the monitored area. If
you then switch on the corresponding turn sig-
nal to change lane, you will also receive an opti-
cal and audible warning. If a risk of lateral colli-
menu using the on-