Mercedes-Benz S-Class Coupe Operator's Manual page 250

Operating system
248
Adjusting the footwell temperature
Call up the climate control menu
X
( page 247).
Y
To selectAdjust
X
the controller.
To change sides: slide 1 the controller.
X
To change the setting: turn the controller.
X
To exit the menu: press the % button.
X
Settings in the bottom bar of the cli-
mate control menu
Switching cooling with air dehumidifica-
tion on/off
i
Activating the cooling with air dehumidifi-
cation facilitates the cooling of the vehicle
interior even with high outside temperatures.
Call up the climate control menu
X
( page 247).
Y
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To selectO A/C: turn and press the con-
X
troller.
The cooling with air dehumidification function
X
is activated O or deactivated ª.
i
The current status of the cooling function is
displayed in the climate control bar: A/C ON
– activated, A/C OFF – deactivated.
i
Deactivating the cooling with air dehumidi-
fication function reduces fuel consumption.
Synchronizing the climate control set-
tings
Use O Sync (synchronization) to select the cli-
mate control setting for all zones together O or
separately ª.
Call up the climate control menu
X
( page 247).
Y
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To selectO Sync: turn and press the con-
X
troller.
The synchronization function is activated O
X
or deactivated ª.
Footwell: turn and press
With the synchronization function switched off,
you can alternate between driver and front
passenger.
To switch from the footer to the main area:
X
slide 5 the controller.
To switch between left and right: slide 1
X
the controller.
Not all climate control functions allow switch-
ing between the driver and front passenger.
For further information on synchronizing climate
control settings, see (
Y
Navigation mode
Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating the navigation system.
General notes
Among other things, correct functioning of the
navigation system depends on GPS reception. In
certain situations, GPS reception may be
impaired, there may be interference or there
may be no reception at all, e.g. in tunnels or
parking garages.
Further information can be found in the Digital
Operator's Manual.
Selecting a route type and route options
Multimedia system:
Select NaviQNavigation.
X
The map shows the vehicle's current position.
Slide 6 the controller.
X
page 115).