Siemens SINUMERIK 840D sl Manual page 99

Preferred call sequence: The NX modules should be inserted between the Line Module and
the control unit.
CAUTION
The 80 mm ventilation spaces above and below the components must be observed.
Mounting an NX10/15 on another NX10/15
Table 11-7 Mounting an NX10/15 on another NX10/15
Opening the cover.
NCU
Manual, 03/2010, 6FC5397-0AP10-3BA0
Unscrewing the screw.
Spare Parts/Accessories
The bracket must be moved so that the
pin is in the opening of the bracket.
Tighten the screw.
11.2 NX10/15
99