Experiencing The Range Of Your Locomotive's Railsounds Sound System - Lionel Freedom Owner's Manual

RailSounds sound system operations
Experiencing the range of your locomotive's RailSounds sound
system
W ith the RailSounds sound system, you
experience the sounds of real
railroading like never before. Simply put,
it's the most sophisticated, authentic model
railroad sound system in the world.
• Four diesel-roar levels. Your
locomotive's speed automatically
determines the level of diesel RPM roar.
If you prefer, you may set the level to
idle, half throttle, three quarters or full-
speed output using your CAB-1 Remote
Controller.
• MultiHorn. A different horn sound at
different speeds—a RailSounds sound
system exclusive.
• Mechanical bell. Press BELL on your
CAB-1 Remote Controller or transformer
to begin the effect, again to discontinue.
• Reverse unit reset sound. Power
down your track, wait for three to five
seconds, and listen for the air-release
sound—that's the locomotive telling
you the Lionel Command reverse unit
has just reset to forward operation.
• Shutdown sequence. No other model
railroad sound system shuts down like
the RailSounds sound system. Turn off
track power, and, after the air-release
reset sound, you have two seconds to
restart your locomotive. If you're done
with operations, the RailSounds sound
system will commence with a realistic
diesel shutdown sequence about two
seconds after the air-release reset occurs.
A nine-volt alkaline battery
Note!
installation is required for
RailSounds shutdown
operation.
9