Function Messages; Security - Worx Landroid WR101SI Instruction Manual

1. Gently turn your Landroid
2. Remove the screws on the battery cover. Remove the battery cover. (See Fig. Q1)
3. Lift out the old battery carefully. Press the latch (a) and release the connectors. (See Fig. Q2)
NOTE: Do not pull by the cables. Hold the connectors and release the latch (a).
4. Connect a new original battery by attaching the connectors together until it clicks into position. (See Fig. Q3, Q4)
5. Fit the battery as shown. (See Fig. Q5) Place the cover back in its position and firmly fit the screws.
Q3
Q5

10. Function Messages

The battery indication light on the interface of Landroid
Battery indication light
Green light on
Red light on
Green light flashing
Green light breathing flashing
Red light flashing

11. Security

®
If Landroid is connected to your smartphone (Only for specific model, please check Technical Data & Declaration of
Conformity), you can lock it on your smartphone. This prevents unauthorised people from being able to use it.
Lawn Mowing Robot
®
upside down.
®
indicates the following status:
Q4
Status
Sufficient power for mowing
Low power, need to recharge
Charging
Standby, waiting for next working schedule.
Battery too hot. Wait until the battery cools down.
17
EN