App; Boundary Wire Basics; Pegging The Boundary Wire - Worx Landroid WR101SI Instruction Manual

®
Your Landroid will cut its best in dry weather. It does not like wet grass, which can build up on the Blade Turning Disc (13)
and within the motor, and can also cause loose traction and slippage while working.
®
Your Landroid is afraid of Lightening Storms. In case of a Lightening Storm, protect the Landroid
Charging Base (3), disconnecting the Boundary Wire (17), and making sure the Landroid
®
Your Landroid loves mowing grass and requires the Cutting Blades (12) to be kept in good condition to cut at its best. The
®
Landroid can do most things by itself, but will need your help sometimes to prevent damage to itself.
• Never let the Landroid
• Remove or prevent access to obstacles that the Landroid
• Remove all debris and foreign objects from your lawn.
6.

APP

®
Your Landroid is able to connect with smart phone. All the general settings can be changed via the Landroid
smartphone, also the APP can show the machine status and error messages.
To connect smart phone to your Landroid
Step 1: To download the Landroid
(google-android), AppleStore (Apple-ios) or our website www.worxlandroid.com.
Step 2: Enter the Landroid
*The Serial No. can be found at the rear of Landroid
NOTE: 1. If your Wi-Fi information has been changed, Landroid
®
2. When Landroid
executed immediately. However, the instruction will be executed after the Landroid
3. For stable signal connection, it is recommended to install Wi-Fi extender at the weak or no Wi-Fi signal areas.
12
7.

Boundary Wire Basics

7.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (20) to set the correct
distance from the border of your lawn (more than 26 cm*).
* This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
If your neighbor also uses a Landroid
spacing of at least 0.5 metres between your Boundary Wire and your
neighbors.
The Boundary Wire must outline the intended mowing
area exactly. Your Landroid
bends or coils of Boundary Wire that are not part of its mowing
area (See Fig. I). If there is excess Boundary Wire after the mowing
area has been outlined, then cut it off and store this additional
wire in a separate location. However, it is important to leave the
necessary length where it connects to the Charging Base so it can
be connected and still remain buried.
Lawn Mowing Robot
®
travel over gravel.
(Only for specific model, please check Technical Data & Declaration of Conformity)
®
:
®
APP , use your smartphone to scan the QR code below or download it from Playstore
®
APP , and then follow the instructions to connect Wi-Fi.
is located at low or no Wi-Fi signal area, the instant instruction sending from mobile APP may not be
®
, then you must keep a
®
will become confused by extra
®
could accidentally climb on and damage its Blade Turning Disc.
®
as shown in Fig. H.
®
needs to be re-set according to Step 1 to 2.
H
I
®
by unplugging the
®
is not allowed to charge.
®
App in your
®
returns back to good signal area.
EN