Operation Messages; Error Messages - Worx L1300 Owner's Manual

1

OPERATION MESSAGES

MESSAGE
Cutting grass
Raining
Going home
Charging
No working time scheduled
Not working today
Work done today
Zone searching
Charge complete
Emergency charge

ERROR MESSAGES

Sometimes things can go wrong. Fortunately Landroid Vision is smart enough to tell you if it is enountering an issue, so you can fix
it. If in doubt, please visit our website where you will find useful videos and further support.
MESSAGE CAUSE
Battery pack cover is open.
Outside working
Landroid Vision cannot find
area! Press START to
the lawn border.
reset.
2
1
LANDROID VISION ACTION
Cutting grass according to the mowing schedule.
The rain sensor detects water. Landroid Vision will return to the charging base and stay
there for the time you have programmed it to do so. When dry, Landroid Vision will auto-
matically begin the rain delay countdown and then return to mow. If you want Landroid
Vision to mow before this, simply turn it off then on again, but only when the rain sensor is
dry, or you can remove the rain delay completely by setting the rain delay time to zero.
Needs to recharge—during the journey to the base, the cutting blade is stopped in order
to save energy.
'Charging' and charge percentage are displayed.
Stand-by, needs to be programmed as desired.
Stand-by, will start according to mowing schedule.
According to the setting of "Customize work zone", Landroid Vision is searching a certain
area to mow.
Landroid Vision has completed its charging.
Landroid Vision is charging in a powered-off state.
ACTION
Close the battery pack cover.
1. If Landroid Vision is actually outside of its working area: turn power
off, take Landroid Vision inside the working area, turn the power on and
press start.
2. If Landroid Vision is inside its working area check if the LED on the
charging pile is solid green.
EN
17