Oki MC363dn User Manual page 128

10. The Printer starts searching for wireless LAN access points. During 2 minutes, press
the easy setup button for the wireless LAN access point for a few seconds.
Once Connection successful is displayed, it indicates that the wireless LAN setup
has completed.
If Connection failed is displayed, repeat the procedure from step 4.
If an antenna appears on the upper right corner of the operator panel, it indicates
that the connection is successful.
Connecting by Selecting a Wireless LAN Access Point from the Control Panel
If the wireless LAN access point does not support WPS, you can connect by selecting the
wireless LAN access point you want to use from those the machine has detected. To do this,
an encryption key is required.
1. Confirm and write down the SSID and encryption key by referring to the user
manual of the wireless LAN access point.
MEMO
> The SSID is also called the network name, ESSID, or ESS-ID.
> The encryption key is also called the network key, security key, password,
or pre-shared key.
2. Confirm that the wireless LAN access point has been activated and is functioning
normally.
3. Turn on the printer.
When the Wireless Setting screen is displayed, select Yes, and press the OK
button.
4. Press up or down on the operator panel to display Wireless(Infrastructure)
Setting, and then press the OK button.
5. Enter the Admin password, and then press the OK button.
6. Select Enable, and then press the OK button.
7. Press up or down on the operator panel to display Wireless Network Selection,
and then press the OK button.
8. The printer starts searching for wireless LAN access points. Please wait.
9. A list of available wireless LAN access point SSIDs are displayed. Press up or down,
select a wireless LAN access point, and press the OK button.
NOTE
If only Manual Setup is displayed or the desired wireless LAN network SSID
is not displayed, follow the procedure in "Connecting by Manual Setup from
Control Panel" to do the settings.
10. A screen opens in which to input the encryption key appropriate to the encryption
procedure for the selected wireless LAN access point; input the encryption key.
MEMO
The encryption key differs depending on the wireless LAN access point and security.
 If Enter the Pre-shared Key. is displayed
ITEM
Encryption method
Encryption key
EXPLANATION
WPA/WPA2-PSK
Enter the pre-shared key.
Installing upgrades > 128