4IPNET WHG301 User Manual page 92

4ipnet WHG301 User's Manual
Click Configuring to go on the related configuration. For the details, please refer to 4.3.1 AP List.
Ÿ
Background AP Discovery: Click Configure to enter Background AP Discovery interface to go on related
configuration.
The Interface and AP Access configuration is the same as the settings mentioned above. When Background
AP Discovery function is enabled, the system will scan once every 10 minutes or according to the time set by
the administrator. If any AP is discovered and "Auto-Add AP" is enabled, it will be assigned an available IP from
the starting IP address and apply the selected template. You can also set the channel the AP would use.
The scanning process may take a long time if the IP range assigned to scan is too wide.
© 2008 4IPNET, INC.
87