Panel Function Descriptions - 4IPNET WHG301 User Manual

3.1.3 Panel Function Descriptions

Front Panel
①
LED: There are four kinds of LED, Power, Status, WAN and LAN, to indicate different status of the system.
Ø Power: LED ON indicates power on.
Ø Status: While system power is on, status OFF indicates BIOS is running; BLINKING indicates the OS is
running, and ON indicates system is ready.
Ø WAN: LED ON indicates connection to the WAN port.
Ø LAN: LED ON indicates connection to the LAN port.
②
WAN1/WAN2: Two WAN ports (10 Base-T / 100Base-TX RJ-45) are available on the system.
③
LAN1~LAN8: Client machines connect to WHG301 via LAN ports (10 Base-T / 100Base-TX RJ-45).
By default, all LAN ports are set with Port-based Default Service Zone; for Service Zone
8
Note:
configuration, please refer to 4.1.7. Service Zones.
Rear Panel
①
Reset: Press this button to restart the system
②
Console: The system can be configured via a serial console port. The administrator can use a terminal
emulation program such as Microsoft's HyperTerminal to login to the configuration console interface to change
admin password or monitor system status, etc.
③
Power Socket: The power adapter attaches here.
7
4ipnet WHG301 User's Manual
© 2008 4IPNET, INC.