Table of Contents
Advertisement
Authentication Method – LDAP
4.2.1.4
Choose "LDAP" from the Authentication Method field, the button beside the pull-down menu will become "LDAP
Setting".
Click the button of LDAP Setting for further configuration. Enter the information for the primary server and/or the
secondary server (the secondary server is not required). The blanks with red asterisk are necessary information
which should be filled in. These settings will become effective immediately after clicking the Apply button.
Ÿ
Server IP: The IP address of the external LDAP server.
Ÿ
Port: The authentication port of the external LDAP server.
Ÿ
Base DN: The Distinguished Name for the navigation path of LDAP account.
Ÿ
Account Attribute: The attribute of LDAP accounts.
Ÿ
Attribute-Group Mapping: This function is to assign a Group to a LDAP attribute sent from the LDAP
server. When the clients classified by LDAP attributes log into the system via the LDAP server, each client
will be mapped to its assigned Group. To get and show the attribute name and value from the configured
LDAP server, enter Username and Password and click Show Attribute. Then, the table of attribute will be
displayed. Enter the Attribute Name and Attribute Value chosen from the attribute table, and select a Group
from the drop-down list box.
49
4ipnet WHG301 User's Manual
© 2008 4IPNET, INC.
Advertisement
Table of Contents
