Quick Software Configuration - 4IPNET WHG301 User Manual

3.2 Quick Software Configuration

4ipnet WHG301 supports web-based configuration. Upon the completion of hardware installation, WHG301 can be
configured via web browsers with JavaScript enabled such as Internet Explorer version 6.0 and above or Firefox.
There are two ways to configure the 4ipnet WHG301 system: using the online Configuration Wizard or changing
the settings by commands manually. The Configuration Wizard comprises of six basic steps as follows. Follow the
instructions of Configuration Wizard to enter the required information step by step, save your settings, and restart
WHG301. The 6 steps of Configuration Wizard are listed below:
Step 1. Change Admin's Password
Step 2. Choose System's Time Zone
Step 3. Set System Information
Step 4. Select Connection Type for WAN Port
Step 5. Add Local User Account (Optional)
Step 6. Save and Restart 4ipnet WHG301
Please follow the following steps to complete the quick configuration:
1.
To access the web management interface, connect a PC to one of the LAN1~8 ports, and then launch a
browse. Make sure you have set DHCP in TCP/IP of your PC to get an IP address dynamically.
Next, enter the gateway IP address of WHG301 at the address field. The default gateway IP address
is" https://192.168.1.254" ("https" is used for a secured connection).
The administrator login page will appear. Enter " admin" , the default username, and " admin" , the default
password, in the User Name and Password fields. Click Enter to log in.
After a successful login, a "Welcome to System Administration" page will appear on the screen.
9
4ipnet WHG301 User's Manual
© 2008 4IPNET, INC.