4IPNET WHG301 User Manual page 79

Hide thumbs Also See for WHG301:

Table of Contents

Ø Maximum Concurrent Session for User: Include Maximum Concurrent Session for User, from 10 to

Unlimited. The concurrent sessions for each user, it can be restricted by administrator.

Note:

For more information, please refer to Appendix E. Session Limit and Session Log.

4.2.4.2 Policy 1 ~ Policy 12

Each Policy consists of access control profiles that can be configured respectively and applied to a certain Group of

users. The clients belonging to a Service Zone will be bound by an applied Policy. In addition, a Policy can be

applied at a Group basis; a Group of users can be bound by a Policy. The same Group can be applied with different

Policies within different Service Zones.

When the type of authentication database is RADIUS, the Class-Group Mapping function will be available to allow

the administrator to assign a Group for a RADIUS class attribute; therefore, a Policy applied to this Group will be

mapped to a user Group of a RADIUS class attribute. When the type of authentication database is LDAP, the

Attribute-Group Mapping function will be available to allow the administrator to assign a Group for LDAP attribute;

therefore, a Policy applied to this Group will be mapped to a user Group of a LDAP attribute. When the type of

database is SIP, the Group selection function will be available to allow the administrator to assign a Group option for

all SIP clients.

Select Policy: Select Policy1~Policy12 to set the Firewall Profile, Specific Route Profile, Schedule Profile

and Maximum Concurrent Session.

Firewall Profile: Each Policy has a firewall service list and a set of firewall profile consisting of firewall rules.

Specific Route Profile: The default gateway of WAN1, WAN2, or a desired IP address can be defined in a

policy. When Specific Default Route is enabled, all clients applied this policy will access the Internet through this

default gateway.

Schedule Profile: The Schedule table in a 7X24 format is used to control the clients' login time. When Schedule

is enabled, clients applied policies are only allowed to login the system at the time which is checked in the

applied policy.

Maximum Concurrent Sessions: Set the maximum concurrent sessions for each client.

4ipnet WHG301 User's Manual

Table of Contents