4IPNET WHG301 User Manual page 77

Ø Firewall Profile: Click Setting for Firewall Profile. The Firewall Configuration will appear. Click
Predefined and Custom Service Protocols to edit the protocol list. Click Firewall Rules to edit the rules.
Predefined and Custom Service Protocols: There are predefined service protocols available for
o
firewall rules editing. The administrator is able to add new custom service protocols by clicking Add,
and delete the added protocols with Select All and Delete operations.
This link leads to a Service Protocols List where the administrator can define a list of service by
protocols (TCP/UDP/ICMP/IP).
Firewall Rules: Click the number of Filter Rule No. to edit individual rules and click Apply to save the
o
settings. The rule status will show on the list. Check "Active" box and click Apply to enable that rule.
This link leads to the Firewall Rules page. Rule No.1 has the highest priority; Rule No.2 has the second
priority and so on. Each firewall rule is defined by Source, Destination and Pass/Block action. Optionally,
a Firewall Rule Schedule can be set to specify when the firewall rule is enforced. It can be set to Always,
Recurring or One Time.
Selecting the Filter Rule Number 1 as an example:
72
4ipnet WHG301 User's Manual
© 2008 4IPNET, INC.