P6 P3.0 With Three-Phase Motor And Inverter (Ewx11831) - Electrolux EWX13611 Service Manual

1.1.2

P6 P3.0 with three-phase motor and Inverter (EWX11831)

Some appliances are fitted with a circuit (in the main circuit board) called Zero Watt (0 Watt with an actual
~
consumption 50 mW) which cuts off the power supply to the appliance:
a. When you press the ON/OFF button to turn off the appliance, the Zero Watt circuit is triggered and cuts off
the supply voltage after a few seconds, just long enough to secure the washing machine (motor off, door
locked, etc...), the cycle and any options selected are reset, so that the next time the appliance is turned on,
it is ready to perform the programme.
(To open the door, you will have to wait one or two minutes for the door safety lock to be released.)
b. If, after 5 minutes, during the programme selecting phase or after the end of the cycle, the appliance
receives no further instructions, it is automatically turned off and the Zero Watt circuit which cuts off the
supply voltage is triggered (for energy savings in conformity with the standards on energy consumption).
All the settings are stored so that when the appliance is turned back on, the programme is ready or if the
auto-off mode was triggered after the end of the cycle, the user can see that the cycle ended normally,
and can restart it if necessary.
If an alarm goes off when a wash programme is running, the automatic turn off is disabled showing the alarm.
The appliances which are not equipped with the Zero Watt (0 Watt) circuit in: "Stand-Off" or "Auto-off" mode,
see para. 1.1.1.
Technical Support - MDM
7/104
599 77 39-16 Rev. 00