Benelli Tornado Naked TRE TR 160 2011 Owner's Manual page 140

OPERATION
4 • OPERATION
Set "Service"
When the first 1000 Km (600Mi) will be reached and every 10.000 Km (6231 Mi) you will see the flashing Service pilot light on the
display, instead of the partial "Trip"rip" for 10 seconds during the vehicle starting.
To reset the Service pilot light, press the START button for at least ten seconds until the pilot light is switched off.
4.5 Adjusting the clock
Switch to function 3.
Press the "Start" button (> 2 sec.); the first figure will start flashing.
Repeatedly press the "Start" button until the desired figure has been entered.
Press the "Start" button (> 2 sec.) to enter the following figure.
Repeat the above procedure to enter the second figure of the "hours", the first and second figure of the "minutes".
Press the "Start" button (> 2 sec.) to confirm the time adjustment and to stop the selection (the flashing).
39