Enabling Plugged In Mode
With this mode enabled, the unit will go to sleep in the selected time of inactiv-
ity even with the power cord plugged into an AC outlet.
To Enable Plugged In Mode:
1.
Click the Power Management submenu.
2.
Click the box next to Plugged In. When the green 'check mark' is selected,
Plugged In Mode will be enabled.
To Disable Plugged In Mode:
1.
Click the Power Management submenu.
2.
Click the box next to Plugged In Mode. When the gray 'X' is selected,
Plugged In Mode will be disabled.
88
Cirrus LT User Manual v2.3 - Chapter 4