NCS Cirrus LT User Manual page 85

How the Cirrus LT detects inactivity
Cirrus LT only detects inactivity by the LCD turning off (not by user inactivity).
There are three ways that the LCD will turn off due to inactivity.
1. If the OSM 'Menu Display Timeout' Menu is set to a value of X minutes,
and the OSM is left open and there is no mouse or keyboard activity for a
duration greater than X, the LCD will turn off.
2. If the Teradici 'OSM Screen Saver Timeout' Menu is set to X seconds, and
there is no mouse or keyboard activity while in Teradici's Firmware for a
duration greater than X seconds the LCD will turn off.
3. If the VM OS is set to turn the display off after a value of X minutes, and
there is inactivity in a VM session for a duration greater than X, the LCD
will turn off.
Cirrus LT User Manual v2.3 - Chapter 4
85