NCS Cirrus LT User Manual page 56

If Auto Connect is enabled, hitting the Commit button will temporarily
disconnect you from your current network in order to apply the changes
made in Preferred Networks. The Cirrus LT will then attempt to connect
you to the network with the highest priority in the list. If this option is
used during a session, you may be disconnected from your session; NCS
suggests making any changes to your wireless settings outside of a
session as a general practice. If Auto Connect is not enabled, you will not
be disconnected and the changes made to Preferred Networks will not
take effect until after you have disconnected from your current net-
work.
Auto Connect
If you would like to auto connect to a network, you must select the auto connect
check box. To enable an automatic connection:
1. Click the Network submenu.
2. Select WiFi.
3. Click the box next to Auto Connection. A blue check mark indicates that
an automatic connection has been enabled.
56 Cirrus LT User Manual v2.3 - Chapter 4