Configuring your Preferred Networks to automatically connect
Setting up a network to automatically connect as a preferred network can
provide a more efficient and productive user experience.
To configure your preferred networks to automatically connect:
1.
2.
52
You need to enable Auto Connect for Preferred Networks. In the OSM,
navigate to the Network > WiFi > Preferred Networks submenu.
a.
Click the box next to Auto Connect. When the blue 'check
mark' is selected, Auto Connect will be enabled.
Next, you need to enable Allow Saving WiFi Passwords. In the OSM,
navigate to the Administrator > Admin Settings > Control Center sub-
menu.
a.
Click the box next to Allow Saving WiFi Passwords. When the
blue 'check mark' is selected, Allow Saving WiFi Passwords
will be enabled.
Cirrus LT User Manual v2.3 - Chapter 4