Table of Contents
Advertisement
Via Teradici's Firmware Menu
To change the timeout duration for the Teradici menu:
1.
From the Teradici main window, select Options > Configuration.
2.
Click on the Power Tab.
3.
Enter the new duration of the OSM Screen-Saver Timeout in seconds, not
minutes. For example, if you wanted to set the duration to 10 minutes,
you would enter 600 seconds (Teradici's Firmware OSM Screen-Saver
Timeout default is set to 300 seconds, or 5 minutes). If you enter '0' Sec-
onds, the OSM Screen-Saver Timeout will only be disabled in the Teradi-
ci Firmware.
4.
Click the 'Apply' button when you are done.
Cirrus LT User Manual v2.3 - Chapter 4
83
Advertisement
Table of Contents
