11.
Go back to the Devices Tab. Under the Last Operation Column, confirm the
selected device's status displays the "apply_certificate successful" message
under the Last Operation column, as shown below.
If you are unsuccessful, go back to Step #6 and try again.
12.
You may also want to verify that the certificate was successfully applied
by checking the OSM on the impacted devices. In order to do this, press
<FN+F10> to bring up the OnScreen Menu (OSM) and go to Administrator,
and click on Certificates Info, as shown below.
Cirrus LT User Manual v2.3 - Chapter 9
133