Binary Signal Configuration - ABB REB500 Applications Manual

1MRK 505 353-UEN
3.4
3.4.1.1
Application Manual
Bay protection functions REB500
Figure 9 Status indication of BP Function
Table 39 Status indication of BP Function – Mode
Dialogue tem Description
Configuration The dialog is in the protection function configuration or setting mode.
Measurements The dialog was started in the measurement display mode.
Test Not implemented in this version.
Read- Write The user can edit and save settings.
Read- only The user cannot edit settings.
Table 40 Status indication of BP Function – Statistics
Dialogue item Description
Configured functions Number of instances created by the user for this bay unit. The maximum
number is 128.
Available parame- The number of memory locations available for protection function settings
ters in the entire system.
Used parameters Number of protection function settings used by the present bay unit.

Binary signal configuration

Configuring binary input signals
Each Bay protection function has a defined number of binary inputs. These are de-
scribed for each of the protection functions in Section 2.3.2.3. .
Configuring bay protection using HMI500
Section 3
23