Bay Protection À Function-Specific Signals - ABB REB500 Applications Manual

1MRK 505 353-UEN
2.3.1.5
2.3.2
2.3.2.1
Application Manual
Bay protection functions REB500
General outputs from BP
Table 8 BU_ Output signals from BP
Signal
29405_BP blocked
29410_BP partial blocked
29600 ParaSet_1 active
29605 ParaSet_2 active
29610 ParaSet_3 active
29615 ParaSet_4 active
Table 9 CU_ Output signals from BP
Signal
49405_BP blocked
49410_BP partial blocked
Bay protection à function-specific signals
Signal designations of binary inputs and outputs
The signal range of REB500 is expanded for the bay protection functions. The BP
function-specific signal can be identified by a 6 digit signal number
Example:
Signal 211105_DIST_Trip CB L1
Table 10 Signal numbers nomenclature
211105
6 Digit signal number
Description
Signals that the outputs of the bay protection functions are
blocked (either the bay concerned or throughout the system).
Signals certain bay protection functions are blocked
(Signal must be set explicitly in the bay protection).
Signals that parameter set 1 is active (activated via the station
bus or an input signal).
Signals that parameter set 2 is active (activated via the station
bus or an input signal).
Signals that parameter set 3 is active (activated via the station
bus or an input signal).
Signals that parameter set 4 is active (activated via the station
bus or an input signal).
Description
Signals that the outputs of the bay protection functions are
blocked (either individual bays or throughout the system).
Signals that certain bay protection output signals in specific
bays or throughout the entire system are blocked (Must be
configured together with the corresponding BU output signal
29410_BP partial blocked).
DIST
Protection function
Section 2
Overview
Trip CB L1
Signal designation
11