Call Station Software Configuration; Call Station Id - Bosch PLENA PLN-6AIO240 Installation And Operating Manual

Plena All-in-One System
7.3

Call Station software configuration

7.3.1

Call station ID

The call station ID in each call station is used to set the priorities between the Call Stations,
depending on the configured Priority mode. Only a maximum of six Call Stations can be
cascaded and connected to an All‑in‑One Unit, so IDs 7 and 8 should not be used. All Call
Stations must have a unique ID.
1.
2.
3.
Call station ID
1
2
3
4
5
6
(7)
(8)
Table 7.3: Call station ID settings
Bosch Security Systems B.V.
Press the PTT button and Zone 6 button simultaneously for more than 3 seconds, the
Talk LED and Zone 6 LED will flash to indicate this configuration mode.
Press button Zone 6 repeatedly to step through eight different ID settings sequentially.
The Zone 1-4 LEDs show the selected ID (0 = LED off, 1 = LED on).
Press the PTT button to store the selected ID for this call station and exit.
Zone 4 LED
0
0
0
0
0
0
0
1
Installation and Operating Manual
Zone 3 LED Zone 2 LED
0 0
0 1
0 1
1 0
1 0
1 1
1 1
0 0
Configuration | en 25
Zone 1 LED
1
0
1
0
1
0
1
0
2014.09 | V1.2 |