Exterior Lamp Switch - Mercedes-Benz Light Truck ML 320 Operator's Manual

Exterior Lamp
Switch
Off
Parking lamps (also side
marker lamps, taillamps, license plate
lamps, instrument panel lamps)
Parking lamps plus low beam
or high beam headlamps
(switch pushed forward)
Standing lamps, left or right side
(depending on turn signal switch
position)
Move stalk to positions:
1 Low beam (exterior lamp switch
position )
2 High beam (exterior lamp switch
position )
3 High beam flasher (high beam
available independent of exterior
lamp switch position)
4 Turn signals, right
5 Turn signals, left
To signal minor directional changes,
such as changing lanes on a highway,
move combination switch to the point
of resistance only and hold it there.
To operate the turn signals
continuously, move the combination
switch past the point of resistance (up
or down). The switch is automatically
canceled when the steering wheel is
turned to a large enough degree.
Standing Lamps
When the vehicle is parked on the
street, the standing lamps (right or left
side parking lamps) can be turned on,
making the vehicle more visible to
passing vehicles
The standing lamps cannot be
operated with the key in steering lock
position 2.
Note:
With the key removed and a front
door open, a warning sounds if the
vehicle's exterior lamps (except
standing lamps) are not switched
off.
58