Emergency/Manual Operation of
Skyview Top
The skyview top can be opened or
closed manually should an electrical
malfunction occur.
The drive for the skyview top is located
behind a cover (1) in the rear
compartment headliner.
Remove cover to gain access to the
drive motors.
Obtain plug and crank (supplied with
vehicle)
Inserting plug (2) into left side drive
motor declutches the motor.
Insert crank (3) into right side motor,
and apply slight pressure to declutch
the motor.
To close the skyview top: turn crank
clockwise.
To open the skyview top open : turn
crank counterclockwise.
Important!
After manually operating the skyview
top, a timing synchronization is needed
for future electrical operation of the
top. To do so, turn key in steering lock
to position 2. Now push and hold
switch until the skyview top is fully
closed. Continue to hold switch for an
additional 15 seconds.
130