Partition Net - Mercedes-Benz Light Truck ML 320 Operator's Manual

Partition Net

(MB Accessory)
Use of the partition net is a particularly
important safety factor when the
vehicle is loaded higher than the top of
the seat backrests with smaller objects.
The partition net can be installed
behind the backrests of the front or
rear seats.
Note:
Passenger use of seats behind
installed partition net is restricted
because of the footwell being taken
up by the net.
Installation:
1. Engage partition net in holders (1).
2. Insert tie down hooks (2) in rings
(3).
3. Pull on loose ends of tie downs until
net is tight.
Removal:
1. Push hooks down to horizontal
position to loosen tie downs.
2. Disengage tie down hooks (2) from
rings (3).
3. Remove partition net from holders
(1)
Storage:
1. Roll up and close partition net
2. Store partition net behind rear seat
bench.
Caution!
While the partition net will help protect
you from smaller objects, it cannot
prevent the movement of large, heavier
objects into the passenger area in an
accident. Such items must be properly
secured using the tie-down rings in the
cargo area floor.
54