Mercedes-Benz Light Truck ML 320 Operator's Manual page 117

Turn Signal Lamp, Side
(W 5 W bulb)
Carefully slide lamp slighly towards
rear (arrow), lift away its front end
first, then remove lamp from panel.
Twist bulb socket counterclockwise
and pull out. Pull bulb out of socket.
Insert new bulb in socket. Reinstall
bulb socket.
To reinstall lamp, set rear end of lamp
into panel and let front end snap into
place.
License Plate Lamps
(C 5 W [tubular] bulb)
Remove both securing screws, remove
lamp and take out bulb.
High Mounted Stop Lamp
(P 21W bulb)
To replace bulb, squeeze both sides (1,
arrows) of cover, fold forward and
remove.
Press tab (2, arrow) on reflector and
remove reflector.
Press bulb down, turn
counterclockwise and remove.
Insert new bulb in socket, push in and
twist clockwise. Reinstall reflector.
Position tabs of cover in slots (3,
arrows) and reinstall cover until
properly seated.
117