Earthing
Input modules
The headend unit must be earthed before you install any modules, i.e. you
have to connect each headend unit to the ground with a wire from the Earth
terminal socket.
It is possible to install up to 16 input modules in a headend unit.
It is optional in which slots you place the individual input modules in the input
section. For convenience each slot has been given a number. An overview of
the slot numbers has been placed on the inside of the door of each unit.
Note
Slot no. 1 is placed in the top left-hand corner of the input section
when you face the front of the unit.
Earthing/Input
9