Connecting Units - Triax 492090 User Manual

Connecting
units
Note
You also have to insert SFP copper or SFP fibre-optic transceiv-
ers into the unit link sockets on the main unit if you want to use the
sockets to output services using an IPTV system.
To connect the main headend unit with one or two subunits you pull Cat5 or
better cables (SFP copper transceiver) or 850 or 1310 cables (depending on
the SFP fibre-optic transceiver) from one unit to another following the guide-
lines in the table below regarding the maximum length of the cables.
Note
Triax recommend you to use shielded Cat cables.
Part Package
492086 Copper SFP
EOLT-C12-02
(RJ45)
492087 Fiber (850nm)
EOLS-8512-MXX (LC)
492088 Fiber (1310nm)
EOLS-
(LC)
1324_02XX

Connecting units

Data rate Reach
1000Mbps
1000Mbps
1000Mbps
15
Application
100m Gigabit Ethernet
via Cat5 cable
550m Gigabit Ethernet
2km Gigabit Ethernet