Table of Contents
Advertisement
Output
Output
modules
It is possible to install up to 6 output modules in a headend unit. Each output
module consists of 4 RF channels. Depending on the type of module you can
add up to 2 CAM modules on each output module.
In the future it may also be possible to add an Aux module (for future options)
to the output section.
It is optional in which slots you place the individual output modules. For
convenience each slot has been given a number, and an overview of the slot
numbers has been placed on the inside of the door of each unit.
Note
Slot no. 1 is placed in the top left-hand corner of the output section
when you face the front of the unit.
You install an output module by sliding it into a slot in the lower section of the
headend unit and click it into place.
Note
You can use hot swapping when you insert a module into or re-
move a module from the TDX system.
12
Advertisement
Table of Contents
