Leds - Triax 492090 User Manual

LEDs

LEDs
To indicate the state of the headend system and the individual units, four
LEDs are placed at the top of the output section of each TDX unit.
The fourLEDs have separate functions.
The colours of the LEDs can be green, green - flashing or red. The message
delivered by the colour depends on the function of the individual LEDs.
System status
Tuner status of
input modules
Unit link 1
Unit link 2
• Green: Power is on and the headend system is up
and running.
• Green - flashing: The headend system is booting.
• Red: An error has been detected in the headend
system and it must be investigated. Use the System
information window as starting point for locating er-
rors. For information about System information, see
"System information" on page 25.
• Green: The tuners are locked.
• Red: One or more tuners are not locked.
• Green: The subunit is connected to the main unit.
• Red: There is a problem with the connection to the
subunit.
• No colour: No subunit is connected to the main unit.
• Green: The subunit is connected to the main unit.
• Red: There is a problem with the connection to the
subunit.
• No colour: No subunit is connected to the main unit.
20