Table of Contents
Advertisement
Below you can see an empty headend unit without the front and top.
RF output
Test point -20 dB
Configuration port
Aux 1 & 2
Unit link 1 & 2
Unit ID switch
Secure Digital (SD)
card
Distributes the RF channels from the output modules
using an F-connector.
RF test point of output (-20 dB).
Note When you attach F-connectors to the RF
output and Test point sockets you have to be
very careful when you tighten the F-connec-
tors or you may destroy the sockets.
Ethernet configuration port for setting up the head-
end system. Connector type is RJ-45 and cable type
is Cat7. Use a computer/laptop with the software
recommended below to configure the system.
Recommendations:
Operating system: Windows XP or above.
Browser: Windows Internet Explorer version 6.0 or
above.
Additional software: Microsoft© Silverlight Runtime
version 3.0 or above.
For future use.
Connects the main unit with subunits 1 and 2.
Switch for setting the ID of the main unit and the two
subunits.
Memory card for storage of the system configura-
tion. Placed in a slot behind the front cover.
7
TDX Unit
Advertisement
Table of Contents
