Table of Contents
Advertisement
TDX Unit
Unit - interior
Inside the TDX unit the interior is divided into two parts, an upper part - input
section - containing all the input modules, and a lower part - output section -
containing all the output modules.
In the input section covers are used to protect all module slots.
For EMC reasons only remove covers from the module slots that you want to
insert modules into.
Extractor fans have been placed in both the input section and the output
section of the unit to prevent the unit from overheating.
In the output section you can slide the cover with the extractor fans from one
side of the output section to the other when you want to install or replace
output modules.
6
Advertisement
Table of Contents
