Table of Contents
Advertisement
Orange
Temporary off
Temporary green
Red
A label is provided on the input module where you can write the information
regarding the configuration of the module.
Besides the information that you write on the label, the module type and
code number are also displayed on the label.
The coloured part of the label informs you of the module type. Each type of
module is allocated a unique coloured label.
On the bottom of the module you will find a label with the bar code and a se-
rial number printed on it.
When all the required input modules have been installed you can connect
the input signal cables one by one to the input modules. It is also possible to
make a loop through from one input module to another using a cable.
When connecting the input signal cables you have to decide whether you
want the cables to go from the top of the headend unit to the input modules
or from the side of the unit to the modules.
Boot loader state.
Initiation of the software update.
Every time the modules receives a valid data package.
Repeated until the update is completed without errors.
Software update failed.
11
Input
Advertisement
Table of Contents
