VTech InnoTab3 User Manual page 30

Case: 1:15-cv-10889 Document #: 73-1 Filed: 05/18/16 Page 30 of 41 PageID #:947
Clock time is
not accurate or
®
InnoTab 3 requests
to set up time
when turning on
®
InnoTab 3.
Touch screen is
inaccurate or it is
impossible to select
the correct icon on the
screen.
Inserted a microSD
card (not included),
but the tablet cannot
Files copied to the
memory disappeared.
When using the
Rechargeable Power
Pack, the console
suddenly turns off
without giving a "Low
Battery" warning.
The battery charging
indicator light does
not come on.
Backup battery
power low or backup
battery is not installed
correctly.
Touch screen requires
calibration.
Small particles inside
gap of LCD screen.
microSD card format is
not FAT32.
was not formatted to
FAT32.
There is uneven charge
storage among the
cells in the battery
packs.
The AC Adapter is not
properly connected,
or the tablet has been
left on.
Replace backup battery
and make sure the backup
battery is installed correctly
(for backup battery
replacement instructions,
please see Backup Battery
Replacement section on
page 24).
Turn the InnoTab ® 3
hold , and
when turning the InnoTab
the steps on the
screen.
Use a tooth pick to gently
remove any small particles
within the gap.
Format the microSD card to
FAT32 in your computer.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
Charge the rechargeable
battery packs for 24 hours
(keep charging even after the
battery charging indicator light
stops flashing).
Inspect the AC adapter.
Make sure that the adapter
is securely connected to the
InnoTab ® and plugged in to the
wall outlet.
Make sure the tablet is turned
off.
down
®
3
26