NOMA 052-6972-6 Instruction Manual page 6

4 Toll-free: 1-866-827-4985 • model n o. 052-6972-6
ASSEMBLY
Installation
1. Mounting bracket
Note: The mounting bracket depicted will vary
depending on the model .
. Remove the four sets of side screws from mounting
bracket and save for future use.
Normal masonry ceiling
.
Securely attach the mounting bracket to
an outlet box marked "Acceptable for Fan
Support", using the supplied outlet box
screws with lock washers (see Fig. 4a).
Wooden ceiling
. Drill two mounting holes in the ceiling joist.Securely
an outlet box marked " Acceptable for Fan Support",
using the supplied outlet box screws with lock washers
(see Fig. 4b).
2. Drop-mount
Note: Canopy picture may vary depending on style
of ceiling fan.
Downrod assembly
. Loosen 2 screws on the motor coupling.
Insert the downrod and thread the safety
cable and wire through the downrod (see Fig. 5)
. Lock the downrod to the motor, tighten
the 2 screws on the motor coupling
(see Fig. 6).
Hands-free wiring
. Carefully lift the fan assembly onto the mounting
bracket.
. Rotate the fan until the notch (b) on the aluminum
ball fits against the ridge (a) on the mounting
3. Dr
bracket (see Fig. 7).
. With the mounting bracket holding the fan assembly,
follow wiring instructions (step 3).
NOTE: For added security, attach safety
cable from fan unit to "J" hook in outlet
box. Secure by looping zip tie through
safety cable and "J" hook. Tighten zip
tie securely.
4a
Lock washer
Outlet box screw
Mounting
bracket
4b
5
6
7
a
b
Flat
washer
wood screw