Siqura HD10A User Manual
  1. Manuals
  2. Brands
  3. Siqura Manuals
  4. Security Camera
  5. HD10A
  6. User manual

Siqura HD10A User Manual

Hd1xa series, dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U ser Ma n ua l
S i q u r a H D 1 x A S e r i e s
High-Speed IP PTZ Dome Cameras

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD10A and is the answer not in the manual?

Questions and answers

Related Manuals for Siqura HD10A

Summary of Contents for Siqura HD10A

  • Page 1 U ser Ma n ua l S i q u r a H D 1 x A S e r i e s High-Speed IP PTZ Dome Cameras...
  • Page 2 Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant components, the manual may nonetheless contain errors and inaccuracies.

  • Page 3: Table Of Contents

    ....................14 ISPLAYING AMERA ARAMETERS ON CREEN OSD M ............................. 15 5.2.1 Siqura HD10A / HD10A PRH / HD12A....................15 5.2.2 Siqura HD11A PRH / HD16A ......................19 ..........................23 ONFIGURATION 5.3.1 Main Page 1 ............................ 23 5.3.1.1 Language ..............................23 5.3.1.2...
  • Page 4 Privacy Mask ............................41 5.3.5.5 Time Setting............................45 5.3.5.6 Schedule ..............................45 5.3.5.7 Exit OSD ..............................46 APPENDIX: OSD MENU NOTES ....................... 47 HD10A / HD10A PRH / HD12A ....................47 IQURA HD11A PRH / HD16A WDR ......................52 IQURA Page ii...

  • Page 5: Introduction

    This manual is aimed at technicians and operators involved in the configuration and operation of Siqura HD1xA cameras. Assumed skills and know-how To work with the Siqura HD1xA camera, an operator must have adequate knowledge and skills in the fields of: CCTV systems and components ...

  • Page 6: Typographical Conventions

    Siqura HD1xA Series Typographical conventions Before you start using this guide, it is important to understand the typographical conventions used in the documentation. The following kinds of formatting in the text identify special information. Formatting convention Type of Information Numbered list Step-by-step procedures.

  • Page 7: Safety Information

    This chapter provides cautions on what to do and what not to do when working with or handling your Siqura HD1xA unit. It also offers information on product compliance with environmental regulations and explains how to dispose of the product at the end of its service life.

  • Page 8: Regulations

    Siqura HD1xA Series Do not expose the indoor dome camera to moisture or operate it in wet areas. The indoor dome camera is designed for indoor use or use in locations where it is protected from rain and moisture. If the indoor camera gets wet, turn the power off immediately and ask a qualified technician for servicing.

  • Page 9: Product Description

    Product Description The Siqura HD1xA series cameras are high-speed PTZ dome cameras designed to deliver superb performance and durability in any security and surveillance installation. This chapter introduces the individual camera models and their features. In This Chapter Models ................7 Product Overview ...............

  • Page 10: Product Overview

    Simplicity The Siqura HD1xA series cameras require only a single cable for ease of installation, and can be integrated with CCTV products such as DVRs, control keyboards, and CCTV accessories for a total surveillance solution.

  • Page 11: Product Features

    8 alarm inputs, 1 alarm output; support for remote streaming of alarm signals  Video motion detection  Flexible indoor/outdoor mountings  Weather-resistant  Pressurised housing (HD10A PRH / HD11A PRH)  Superior Camera Image Quality Minimum illumination 0.01 Lux (B/W)  Digital Slow Shutter  Electronic Shutter ...

  • Page 13: Using The On-Screen Display

    Using the On-Screen Display Refer to the following sections to operate and set the dome camera using its on-screen display (OSD). You can control the dome camera via the OSD or with a control keyboard or other control device. In This Chapter Using a control keyboard to access the on-screen menus ..

  • Page 15: Camera Configuration Via The On-Screen Menu

    Camera Configuration via the On-Screen Menu The Siqura HD1xA's On-Screen Menu (OSM) can be used to configure detailed camera functions and parameter settings. This chapter provides a detailed description of OSM structures, settings, and values for the various models of the Siqura HD1xA series.

  • Page 16: Displaying Camera Parameters On Screen

    Siqura HD1xA Series Displaying Camera Parameters on Screen. Certain camera parameters can be selectively displayed on screen as described below. Position Function OSD Display Description Focus modes Auto focus mode Manual focus mode Backlight Backlight compensation OFF Backlight compensation ON...

  • Page 17: Osd Menu Tree

    The OSD setup menu structure is listed in the following tables. Print the OSD menu table (see "Appendix: OSD Menu Notes" on page 47) to record your own settings. 5.2.1 Siqura HD10A / HD10A PRH / HD12A Item Layer 1...
  • Page 18 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Default SHUTTER SPEED: <1/50> ~ <1/10000> SEC. IRIS VALUE: <F1.6> GAIN VALUE <-3>dB ~ <28>dB EXIT + SAVE: YES EXIT WBC MODE AUTO (Auto White Balance) INDOOR OUTDOOR ATW (Auto-tracing WBC) MANUAL R GAIN <000>...
  • Page 19 Camera Configuration via the On-Screen Menu Item Layer 1 Layer 2 Layer 3 Default SYSTEM RESET SYSTEM RESET <YES> DEFAULT SYSTEM <YES> EXIT <YES> ID DISPLAY <ON>, <OFF> TITLE DISPLAY <ON>, <OFF> TITLE SETTING <01> ~ <16> PRESET PRESET SET <001>...
  • Page 20 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Default CRUISE LINE <001> ~ <008> RETURN TIME <001> ~ <128> MIN. 001 ENTER EXIT IR FUNCTION AUTO THRESHOLD <MID>, <HI>, <LOW> AUTO (Optional) EXIT + SAVE: YES MANUAL IR MANUAL: <ON>, <OFF>...

  • Page 21: Siqura Hd11A Prh / Hd16A

    <001> ~ <008> IR FUNCTION IR FUNCTION <AUTO>, <ON>, <OFF> SCHEDULE RESET EXIT OSD 5.2.2 Siqura HD11A PRH / HD16A Item Layer 1 Layer 2 Layer 3 Default LANGUAGE ENGLISH, FRENCH, GERMAN, ITALIAN, PORTUGUESE, ENGLISH SPANISH, RUSSIAN, POLISH, SIMPLIFIED CHINESE,...
  • Page 22 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Default <00> ~ <05> WBC MODE AUTO MANUAL R GAIN <00> ~ <99> B GAIN <00> ~ <99> SETUP MENU 1 ZOOM SPEED <FAST>, <SLOW> FAST DIGITAL ZOOM <OFF>, <02> ~ <12>...
  • Page 23 Camera Configuration via the On-Screen Menu Item Layer 1 Layer 2 Layer 3 Default SPEED <01> ~ <15> DWELL TIME <000 SEC> ~ <127 SEC> RUN SEQUENCE <ENTER> EXIT <YES> AUTO PAN AUTO PAN LINE <1> ~ <4> START POINT <TO FIND>, <TO SAVE>...
  • Page 24 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Default V CENTER <000> ~ <255> H SIZE <000> ~ <127> V SIZE <000> ~ <127> EXIT+SAVE <YES> CLEAR MASK <01> ~ <08>, <RESET> MASK DISPLAY <FIRST>, <LAST> EXIT <YES>...

  • Page 25: Configuration Menu

    Backlight compensation The backlight compensation (BLC) function prevents the center object from being too dark in surroundings where there is excessive light behind the object. Siqura HD10A / HD10A PRH / HD12A Select to activate the function. The center object will be brightened in contrast to the edges of the picture.

  • Page 26: Focus

    The focus of the dome camera can be operated in two modes: Auto Focus mode and Manual Focus. Various settings for the different models are described below. AUTO: Siqura HD10A / HD10A PRH / HD12A The optimum focus is achieved by the internal digital circuit. There are three modes for users to...

  • Page 27: Auto Exposure

    (iris adjustment), by how long you keep the sensor exposed (shutter speed), and by other exposure parameters. Under this menu, users can define how the auto exposure (AE) function works. AE MODE: Siqura HD10A / HD10A PRH / HD12A AUTO ...

  • Page 28: White Balance Control (Wbc)

    EXPOSURE COMPENSATION  The exposure value ranges from -10.5dB ~ 10.5dB. Select to disable the function. AE MODE: Siqura HD11A PRH / HD16A WDR AUTO  In this mode, the camera's shutter, IRIS, and AGC control function work automatically to compensate the light exposure of the image sensor for consistent video output level.
  • Page 29 Camera Configuration via the On-Screen Menu WBC MODE: Siqura HD10A / HD10A PRH / HD12A AUTO  In this mode, white balance works within its colour temperature range. This mode computes the white balance value output using colour information from the entire screen.

  • Page 30: Setup Menu 1

    Siqura HD1xA Series 5.3.2 Setup Menu 1 SETUP MENU 1 is accessed from the MAIN PAGE 1 menu. Siqura HD10A / HD10A PRH / HD12A Siqura HD11A PRH / HD16A WDR 5.3.2.1 Zoom Speed This item is used to set the zoom speed of the dome camera.

  • Page 31: Slow Shutter

    The shutter speed determines how long the image sensor is exposed to light. To see clear images in a dark environment, enable this function and select a slower shutter speed. Siqura HD10A / HD10A PRH / HD12A When the digital slow shutter function is enabled, the dome automatically adjusts the shutter speed based on the light conditions of the installation environment.

  • Page 32: Exit

    Siqura HD1xA Series 5.3.2.8 Exit Exit SETUP MENU 1 and return to MAIN PAGE 1 to set other functions under SETUP MENU 2. 5.3.3 Setup Menu 2 SETUP MENU 2 - for all models in this range - is accessed from the MAIN PAGE 1 menu.

  • Page 33: Angle Adjuster

    Camera Configuration via the On-Screen Menu 5.3.3.2 Angle Adjuster Use this item is to adjust the camera view angle. The range of the view angle varies in different FLIP modes. The range of the view angle ranges from -10° ~ +100° in the M.E. FLIP and FLIP OFF modes, and from -10°...

  • Page 34: Main

    Siqura HD1xA Series 5.3.4 Main Page 2 MAIN PAGE 2 is accessed by pressing the direction key to switch the MAIN PAGE from 1 to 2. 5.3.4.1 ID Display Users may choose whether the dome ID will be displayed on screen for identifying the domes.

  • Page 35: Title Setting

    Up to 16 zone titles can be set with a maximum of 20 characters for each title. Each view area's title can be named with a privacy mask ID number for future recognition. For the Siqura HD11A PRH / HD16A WDR models, the available area for setting a privacy Note: mask is restricted within a tilt angle of 45°.

  • Page 36: Preset

    Siqura HD1xA Series 5.3.4.4 Preset PRESET SET The Siqura HD1xA series cameras support a total of 256 preset points. To set a preset point  Go to the Preset Setting menu. Press the LEFT/RIGHT key to select a number (1 represents preset point 1, 2 represents preset point 2, etc.).

  • Page 37: Sequence

    Camera Configuration via the On-Screen Menu 5.3.4.5 Sequence This function executes pre-positioning of the pan, tilt, zoom and focus features in a certain sequence for a camera. Before setting this function, users must define at least two preset points. Parameters SEQUENCE LINE ...

  • Page 38: Auto Pan

    Siqura HD1xA Series 5.3.4.6 Auto Pan Auto pan is the motion of scanning an area horizontally so the dome camera captures a horizontal view. The parameters are as follows: AUTO-PAN LINE There are four sets of auto-pan lines built in to a dome camera. Choose a line to execute by using the left/right direction keys.

  • Page 39: Cruise

    Camera Configuration via the On-Screen Menu SPEED Use this item to define the dome camera rotation speed while running auto-pan. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.). RUN AUTO PAN After you configure all auto-pan settings, select this item to execute the auto-pan function. Press to run an auto-pan path.

  • Page 40: Home Setting

    Siqura HD1xA Series EXIT Exit the CRUISE setup menu, and return to MAIN PAGE 2 to configure home settings. Users can execute the auto-pan function via keyboard. Refer to the control keyboard's Note: quick guide for more information. 5.3.4.8 Home Setting Users are able to set an operation mode to ensure constant monitoring;...

  • Page 41: Main

    In the Siqura HD11A PRH / HD16A WDR models, users are able to view colour images when the IR function is activated. Refer to the description below to operate the IR function.

  • Page 42: Alarm Detect

    Siqura HD1xA Series Siqura HD11A PRH / HD16A WDR AUTO The Internal circuit will automatically decide the occasion to remove the IR cut filter according to the image brightness level. Select this item to remove the IR cut filter. THRESHOLD The dome removes the filter immediately when the threshold value is reached.

  • Page 43: Wdr Function

    As a starting point, so that you will see a mask, a privacy mask has a default size of 10x10 when initially turned on. The Image Flip function (for all models) and the Image Inverse function (for Siqura HD11A Note: PRH / HD16A WDR) are disabled automatically when the Privacy Mask function is enabled.
  • Page 44 SET MASK menu. The dome will memorise the present position as a ENTER privacy mask position. Up to 24 masks can be set in the HD10A and HD12A, and the HD16A WDR can have up to 8 masks.
  • Page 45 Note: For the Siqura HD11A PRH / HD16A WDR models, the available area for setting a privacy mask is restricted within a tilt angle of 45°, and two mask zones may be set in a view area.
  • Page 46 Siqura HD1xA Series H CENTER (000~255)  The original center of a mask zone is the center of the screen. To move the center of the mask zone to another position, adjust this value using the LEFT/RIGHT keys. V CENTER (000~255) ...

  • Page 47: Time Setting

    HOUR / MINUTE These items are for configuring the system time. EXIT+SAVE Exit the TIME SETTING menu and return to MAIN PAGE 3 to configure the schedule. Siqura HD10A / HD10A PRH / HD12A Siqura HD11A PRH / HD16A WDR 5.3.5.6 Schedule The schedule function enables users to program a preset point or function (Sequence/Auto-Pan/Cruise) to perform automatically at a specified period.

  • Page 48: Exit Osd

    SCHEDULE RESET Use this item to return the schedule to its default settings. EXIT Exit the SCHEDULE menu and return to MAIN PAGE 3. Siqura HD10A / HD10A PRH / HD12A Siqura HD11A PRH / HD16A WDR 5.3.5.7 Exit OSD To exit the OSM, users can either select this item at the bottom of MAIN PAGE 3 or press the ESC key on a control keyboard.

  • Page 49: Appendix: Osd Menu Notes

    The OSD menu tables in this appendix enable you keep your dome settings on record. In This Chapter Siqura HD10A / HD10A PRH / HD12A ........47 Siqura HD11A PRH / HD16A WDR ........52 Siqura HD10A / HD10A PRH / HD12A...
  • Page 50 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Notes IRIS BRIGHT VALUE: AUTO SHUTTER SPEED: AUTO IRIS VALUE: <F1.6> GAIN VALUE: AUTO EXIT + SAVE: YES MANUAL BRIGHT VALUE: AUTO SHUTTER SPEED: <1/50> ~ <1/10000> SEC. IRIS VALUE: <F1.6>...
  • Page 51 Appendix: OSD Menu Notes Item Layer 1 Layer 2 Layer 3 Notes MAX ANGLE <080 ~ 100 DEG> EXIT + SET SPEED BY ZOOM <ON>, <OFF> AUTO CALI. <ON>, <OFF> PASSWORD <ON>, <OFF> OSD AUTO CLOSE <OFF>, <10> ~ <30> SEC. SYSTEM RESET SYSTEM RESET <YES>...
  • Page 52 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Notes SELECT MODE PRESET SEQUENCE AUTOPAN CRUISE PRESET POINT <001> ~ <256> SEQUENCE LINE <001> ~ <008> AUTOPAN LINE <001> ~ <004> CRUISE LINE <001> ~ <008> RETURN TIME <001> ~ <128> MIN.
  • Page 53 Appendix: OSD Menu Notes Item Layer 1 Layer 2 Layer 3 Notes H SIZE <000> ~ <080> V SIZE <000> ~ <060> EXIT + SAVE CLEAR MASK <01> ~ <16> EXIT TIME SETTING ENTER TIME DISPLAY <ON>, <OFF> SET YEAR <00>...

  • Page 54: Siqura Hd11A Prh / Hd16A Wdr

    Siqura HD1xA Series Siqura HD11A PRH / HD16A WDR Item Layer 1 Layer 2 Layer 3 Notes LANGUAGE ENGLISH, FRENCH, GERMAN, ITALIAN, JAPANESE, POLISH, PORTUGUESE, RUSSIAN, SPANISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE, JAPANESE, TURKISH BACKLIGHT <ON> BLC LEVEL <00> ~ <30>...
  • Page 55 Appendix: OSD Menu Notes Item Layer 1 Layer 2 Layer 3 Notes EXIT <YES> EXIT <YES> ID DISPLAY <ON>, <OFF> TITLE DISPLAY <ON>, <OFF> TITLE SETTING <01> ~ <16> PRESET PRESET SET <001> ~ <256> PRESET RUN <001> ~ <256> EXIT <YES>...
  • Page 56 Siqura HD1xA Series Item Layer 1 Layer 2 Layer 3 Notes EXIT <YES> ALARM SETTING <NONE> WDR FUNCTION AUTO RATIO LEVEL <001> ~ <128> SHUTTER SPEED <001> ~ <128> IRIS OFFSET <001> ~ <128> EXIT <YES> PRIVACY MASK PRIVACY SWITCH <ON>, <OFF>...
  • Page 57 Appendix: OSD Menu Notes Item Layer 1 Layer 2 Layer 3 Notes CRUISE CRUISE LINE <001> IR FUNC. IR FUNCTION <AUTO>, <ON>, <OFF> SCHEDULE <YES> RESET EXIT <YES> EXIT OSD <YES> Page 55...

This manual is also suitable for:

Hd11a prhHd12aHd10a prhHd16a wdr

Table of Contents