Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Da-Lite Manuals
  4. Projection Screen
  5. IDEA Screen
  6. Instruction book

Da-Lite IDEA Instruction Book

Screen & panoramic for nureva span
Hide thumbs Also See for IDEA:

Advertisement

Quick Links

Download this manual
INSTRUCTION BOOK FOR
IDEA™ Screen & Panoramic
for Nureva Span

Advertisement

loading

Related Manuals for Da-Lite IDEA

Summary of Contents for Da-Lite IDEA

  • Page 1 INSTRUCTION BOOK FOR IDEA™ Screen & Panoramic for Nureva Span...

  • Page 2: Important Safety Instructions

    Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. Da-Lite® is a registered trademark of Milestone AV Technologies. All rights reserved. Important Safety Instructions Read and understand all instructions before using.
  • Page 3 Hardware Provided - IDEA Screen (Single Panel) (7) #8 x 1/2” Screws (2) L-Brackets (2) 44” Wall Brackets Hardware Provided - IDEA Panoramic (Multi-Panel) #8 x 1/2” Screws L-Brackets 10-32 Nuts Number of supplied screws (4) - 2 Panel Screens...
  • Page 4 Preparation It requires two people to assemble a single panel IDEA Screen and four people to assemble a multiple panel IDEA Panoramic. To maintain optimal projected image geometry and screen alignment, a flat and straight wall free from obstructions and angular distortions should be used.
  • Page 5 Wall Mounting Instructions for Single Panel Screens NOTE: The screen is shipped with two 44” wall brackets. Use 2. To install the (2) L-brackets, you must measure the overall height appropriate mounting hardware for the wall type and to of the screen frame and subtract 1⅛”. Using that dimension, accommodate for the screen’s hanging weight (Figure 1).
  • Page 6 Wall Mounting Instructions for Single Panel Screens (continued) 4. This step requires two people. Hang the screen on the wall 5. Tap the bottom of the two L-brackets with the rubber mallet until brackets. There is a lip on the back of the frame that wedges itself they make contact with the frame.
  • Page 7 Assembly Instructions for Multi-Panel Screens Carefully unpack unit and place all panels on top of the clean 5. Use ⅜” open wrench or socket driver and (4) 10-32 nuts to attach work area. The viewing surface of each panel must face down. seam brace onto the studs on the top and bottom of screen frame at the panel seam.
  • Page 8 Wall Mounting for Multi-Panel Screens NOTE: The screen is shipped with four or six wall brackets that 3. Secure the third two panel wall brackets to wall studs at the vary by screen size. Two brackets will be used on each of the height selected in Step 1.
  • Page 9 Wall Mounting Instructions for Multi-Panel Screens (continued) 6. Repeat Steps 4-5 to install the remaining L-brackets for the 7. Using all four people, carefully lift the fully assembled multi-panel remaining panels. screen to an upright position and place underneath the mounted wall and L-brackets.
  • Page 10 Using the two provided #8 x 1/2” screws, attach the Remove the cover from the touch module. Using the screws bracket and touch module to the IDEA frame with the touch provided with the projection system, attach the touch module facing towards the audience.
  • Page 12 Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective part of the merchandise. Returns for service should be made to your Da-Lite dealer. If it is necessary for the dealer to return the screen or part to Da-Lite, transportation expenses to and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in shipment.