Voice End-Points; Auto Voice Vlan, Auto Smartports, Cdp, And Lldp - Cisco Small Business 200 Administration Manual

Table of Contents

Advertisement

VLAN Management
Voice VLAN
Cisco Small Business 200 Series Smart Switch Administration Guide

Voice End-Points

To have a voice VLAN work properly, the voice devices, such as Cisco phones and
VoIP endpoints, must be assigned to the voice VLAN where it sends and receives
its voice traffic. Some of the possible scenarios are as follows:
A phone/endpoint may be statically configured with the voice VLAN.
A phone/endpoint may obtain the voice VLAN in the boot file it downloads
from a TFTP server. A DHCP server may specify the boot file and the TFTP
server when it assigns an IP address to the phone.
A phone/endpoint may obtain the voice VLAN information from CDP and
LLDP-MED advertisements it receives from their neighbor voice systems
and switches.
The device expects the attaching voice devices to send voice VLAN, tagged
packets. On ports where the voice VLAN is also the native VLAN, voice VLAN
untagged packets are possible.

Auto Voice VLAN, Auto Smartports, CDP, and LLDP

Defaults
By factory defaults, CDP, LLDP, and LLDP-MED on the device are enabled, auto
Smartport mode is enabled, Basic QoS with trusted DSCP is enabled, and all ports
are members of default VLAN 1, which is also the default Voice VLAN.
In addition, Dynamic Voice VLAN mode is the default to Auto Voice VLAN with
enabling based on trigger, and Auto Smartport is the default to be enabled
depending on Auto Voice VLAN.
Voice VLAN Triggers
When the Dynamic Voice VLAN mode is Enable Auto Voice VLAN, Auto Voice
VLAN becomes operational only if one or more triggers occur. Possible triggers
are static voice VLAN configuration, voice VLAN information received in neighbor
CDP advertisement, and voice VLAN information received in the Voice VLAN
Discovery Protocol (VSDP). If desired, you can activate Auto Voice VLAN
immediately without waiting for a trigger.
When Auto Smartport is enabled, depending on Auto Voice VLAN mode, Auto
Smartport is enabled when Auto Voice VLAN becomes operational. If desired, you
can make Auto Smartport independent of Auto Voice VLAN.
12
182

Advertisement

Table of Contents
loading

Table of Contents