Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
Cisco Small Business 200 Series Smart Switch Administration Guide
Endpoint Class 1
-
LLDP services.
Endpoint Class 2
-
streaming capabilities, as well as all Class 1 features.
Endpoint Class 3
-
Class 1 and Class 2 features plus location, 911, Layer 2 device support,
and device information management capabilities.
•
PoE Device Type—Port PoE type; for example, powered.
•
PoE Power Source—Port power source.
•
PoE Power Priority—Port power priority.
•
PoE Power Value—Port power value.
•
Hardware Revision—Hardware version.
•
Firmware Revision—Firmware version.
•
Software Revision—Software version.
•
Serial Number—Device serial number.
•
Manufacturer Name—Device manufacturer name.
•
Model Name—Device model name.
•
Asset ID—Asset ID.
Location Information
•
Civic—Street address.
•
Coordinates—Map coordinates: latitude, longitude, and altitude.
•
ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy Table
•
Application Type—Network policy application type; for example, Voice.
•
VLAN ID—VLAN ID for which the network policy is defined.
•
VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
Tagged
-
—Indicates the network policy is defined for tagged VLANs.
—Indicates a generic endpoint class, offering basic
—Indicates a media endpoint class, offering media
—Indicates a communications device class, offering all
8
94
Advertisement
Table of Contents
