Table of Contents
Advertisement
Administration: File Management
Configuration Files Properties
STEP 6
Configuration Files Properties
Cisco Small Business 200 Series Smart Switch Administration Guide
If Save Action is Download (replacing the file on the device with a new version
from another device), enter the following fields.
•
Source File Name—Enter the name of the source file.
•
Destination File Type—Select the configuration file type. Only valid file
types are displayed. (The file types are described in the
Types
section).
If Save Action is Backup (copying a file to another device), enter the following
fields (in addition to those fields listed above):
•
Source File Type—Select the configuration file type. Only valid file types
are displayed. (The file types are described in the
section).
•
Sensitive Data—Select how sensitive data should be included in the
backup file. The following options are available:
-
Exclude—Do not include sensitive data in the backup.
-
Encrypted—Include sensitive data in the backup in its encrypted form.
-
Plaintext—Include sensitive data in the backup in its plaintext form.
The available sensitive data options are determined by the current
NOTE
user SSD rules. For details, refer to Secure Sensitive Data Management >
SSD Rules page.
•
Destination File Name—Name of file being copied to.
Click Apply. The file is upgraded or backed up.
The Configuration Files Properties page allows you to see when various system
configuration files were created. It also enables deleting the Startup Configuration
and Backup Configuration files. You cannot delete the other configuration file
types.
4
Files and File
Files and File Types
44
Advertisement
Table of Contents
