Remington EYE BALL R1 Owner's Manual page 3

Eye Ball FCC ID:TII-EBR1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been authorized by the Federal Communications Commission for sale only directly to law enforcement organizations that are
eligible for licensing under the provisions of Section 90.20 of the Commission's rules. This device has not been authorized and may not be offered for
sale or lease, or sold or leased, to any other entities.
The Eyeball transmitters shall be used only by law enforcement agencies for emergencies involving safety-of-life and for training purposes. The
transmitters shall not be used for permanent or fixed operations .
This device operates at the 2.4 GHz band, a frequency band used by radio local area network equipment, cordless telephones, and other
unlicensed devices that are certified by the Federal Communications Commission (FCC). Such other devices operating in the same vicinity as the
Eyeball R1 could cause degradation or loss of its signal. Operation of this device could cause other 2.4 GHz devices and s ystems in the vicinity
to lose their ability to transmit packets or digital signals, or may slow packet transmission rates and their operation could interfere with this
device. Where repetitious use of the device is planned in a specific geographic area (e.g., a security perimeter), and when it will not compromise the
mission, frequency coordination with existing 2.4 GHz systems is desirable to minimize the potential for mutual interference. Where possible and not
mission compromising, Eye Ball R1 users should select a channel that is not in use by other 2.4 GHz devices in the vicinity, or should notify area 2.4
GHz users how to adjust frequencies if their systems experience degradation in packet delivery rates.
The Eye Ball R1 is developed and manufactured by ODF Optronics Ltd.