Training; General System Operation - Remington EYE BALL R1 Owner's Manual

Training is essential for rapid and effective use of the Eye Ball R1 System during field
operations. This section suggests exercises to help users become familiar with Eye Ball
procedures, functions and deployment.

General system operation

Work with the RV nearby so you can see how the PDU's controls affect the RV:
Learn how to set up the PDU hood.

Learn how to turn the RV on and off by removing and replacing the Pull Pin.

Learn how to turn the PDU on and off.

Learn how to check system operation.

Review and understand all PDU controls.

Learn how to control the RV with the PDU.

Learn how to charge the RV and PDU.

Deploy the Remote Viewer
The Training Ball is the same size and weight as the Remote Viewer, but it does not
contain electronics. Use the Training Ball during rolling, tossing, dropping and lower-
ing exercises.
Learn how to roll the Training Ball.

Learn how to toss the Training Ball.

Learn how to drop the Training Ball.

Learn how to lower the Training Ball using a lowering wire.

Learn how to elevate the Training Ball using the Telescoping Pole.

Simulate field operations
Work with the real RV and PDU to:
Learn how to deploy the RV so you can see what is around a corner.

Learn how to deploy the RV so you can see what is in an enclosed area, such as

inside a garage or in a fenced yard.
Learn how to deploy the RV through an open door or window so you can see what is

inside a room.
21

Training