Remington EYE BALL R1 Owner's Manual page 14

12
Using
6. Select one RV: press the Standby button
between the RVs).
If you don't see video from the RV, verify that the RV and PDU are charged.

If there is video interference:

Reorient the video/audio antenna (on the right side of the PDU).

Press the Channel button

four radio channels.)
7. Verify RV movement:
a. Nudge the RV by about 10º: momentarily press one Direction
button.
b. Repeat step a for the other direction.
c. Nudge the RV by about 30º: press one Direction button for about 2 seconds.
d. Repeat step c for the other direction.
8. Verify RV rotation:
a. Initiate continuous rotation: press the Rotation On/Off button
The RV should rotate in the direction it was last nudged.
b. Stop continuous rotation: press the Rotation On/Off button
press either Direction
9. Verify illumination operation:
a. Place the RV in a dark area.
b. Press the Illumination button
(as indicated above the button). You should see the scene clearly on the PDU.
c. Press and hold the Illumination button (about 2 seconds) to select Auto
Illumination Mode (as indicated above the button). You should see the scene
clearly on the PDU.
once, quickly (each press toggles
on the PDU. (Each RV can operate on one of
button.
on the PDU to turn the Illumination LEDs on
.
, or
continued