Remington EYE BALL R1 Owner's Manual page 21

E. Complete the mission
1. When the RV deployment area is safe, retrieve all deployed RVs.
2. Switch system to Standby Mode: press and hold (about 3 seconds) the Standby
button until the Standby indicator turns on.
3. Turn off the RVs: insert the Pull Pins
into the Charging Jacks.
4. Turn off the PDU: press and hold
(about 2 seconds) the Power button
5. As soon as possible, recharge the
PDU and RVs, so they will be
ready for the next mission.
.
Pull Pin
19
Using
Charging Jack